Implementing and Administering Cisco Solutions (CCNA) v2.2 Training & Certification Course
Build foundational networking skills to install, operate, configure, and verify IPv4 and IPv6 networks, configure Cisco switches, routers and wireless LAN controllers, manage network devices, and understand security, automation, programmability, AI and ML in network operations.
Course Overview
The course covers networking fundamentals, host-to-host communication, Cisco IOS Software, LANs, TCP/IP, switching, IPv4 addressing and subnetting, routing, IPv6, VLANs and trunks, inter-VLAN routing, OSPF, EtherChannel, access control lists, internet connectivity, system monitoring, device management, administrative access, device hardening, Layer 3 redundancy, WAN technologies, QoS, wireless fundamentals, architectures and virtualization, software-defined networking, network programmability, security threats, and threat defense technologies.
Hands-on practice includes working with the Cisco command-line interface, switch and router configuration, Layer 2 discovery, default gateways, packet forwarding, troubleshooting switch and port issues, IPv4 and IPv6 static routing, VLANs and trunks, inter-VLAN routing, single-area OSPF, EtherChannel, IPv4 ACLs, NAT, NTP, Cisco IOS image backup and upgrade, secure console and remote access, port security, wireless LAN controller access, WLAN configuration, RADIUS, SNMP and Syslog.
Optiv Solutions can enhance the learner experience through instructor-led delivery, flexible learning options, practical lab-focused sessions, structured exam preparation, trainer guidance, learning resources, assessments, revision support and post-training assistance. The learning approach can be adapted to individual and corporate requirements while keeping the training aligned with the Cisco course objectives.
Skills You’ll Develop
Who Should Attend
WHO SHOULD ATTEND (TARGET AUDIENCE)
• Entry-level Network Administrators
• Entry-level Network Support Technicians
• Entry-level Help Desk Technicians
• Network Administrators
• Network Support Professionals
• IT Professionals seeking foundational networking skills
• Professionals preparing for the 200-301 CCNA certification exam
Pre-requisites
RECOMMENDED KNOWLEDGE BEFORE TAKING THIS COURSE
- ✓ Understanding of the OSI model and network fundamentals
- ✓ Familiarity with binary and hexadecimal numbering systems
- ✓ Ability to use a command-line interface (CLI) for device configuration
- ✓ Fundamental knowledge of IPv4 and IPv6 addressing and subnetting
Certification Exam Details
Everything you need to know about the certification exam
Exam Details
Upcoming Batch Schedule
Enroll in upcoming batches and start your learning journey
Curriculum & Course Syllabus
Module 1: Networking Fundamentals
- Exploring the Functions of Networking
- Introducing the Host-To-Host Communications Model
- Operating Cisco IOS Software
- Introducing LANs
- Exploring the TCP/IP Link Layer
- Starting a Switch
Module 2: IP Addressing and Routing
- Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets
- Explaining the TCP/IP Transport Layer and Application Layer
- Exploring the Functions of Routing
- Configuring a Cisco Router
- Exploring the Packet Delivery Process
- Troubleshooting a Simple Network
- Introducing Basic IPv6
- Configuring Static Routing
Module 3: Switching and Network Access
- Implementing VLANs and Trunks
- Routing Between VLANs
- Introducing OSPF
- Building Redundant Switched Topologies
- Improving Redundant Switched Topologies with EtherChannel
- Explaining the Basics of ACL
- Enabling Internet Connectivity
Module 4: Network Operations and Management
- Introducing AI and ML in Network Operations
- Introducing System Monitoring
- Managing Cisco Devices
- Securing Administrative Access
- Implementing Device Hardening
- Exploring Layer 3 Redundancy
Module 5: WAN, Wireless and Modern Network Architecture
- Introducing WAN Technologies
- Introducing QoS
- Explaining Wireless Fundamentals
- Introducing Architectures and Virtualization
- Explaining Software-Defined Networking
- Introducing Network Programmability
Module 6: Network Security
- Examining the Security Threat Landscape
- Implementing Threat Defense Technologies
Module 7: Hands-on Labs
- Get Started with Cisco CLI
- Observe How a Switch Operates
- Perform Basic Switch Configuration
- Inspect TCP/IP Applications
- Configure an Interface on a Cisco Router
- Configure and Verify Layer 2 Discovery Protocols
- Configure Default Gateway
- Explore Packet Forwarding
- Troubleshoot Switch Media and Port Issues
- Troubleshoot Port Duplex Issues
- Configure Basic IPv6 Connectivity
- Configure and Verify IPv4 Static Routes
- Configure IPv6 Static Routes
- Configure VLANs and Trunks
- Configure Inter-VLAN Routing
- Configure and Verify Single-Area OSPF
- Configure and Verify EtherChannel
- Configure and Verify IPv4 ACLs
- Configure a Provider-Assigned IPv4 Address
- Configure Static NAT
- Configure Dynamic NAT and PAT
- Configure and Verify NTP
- Create the Cisco IOS Image Backup
- Upgrade Cisco IOS Image
- Secure Console and Remote Access
- Enable and Limit Remote Access Connectivity
- Configure and Verify Port Security
- Log in to and Monitor the WLC
- Configure an Open Wireless Network
- Define a RADIUS Server and Enable SNMP and Syslog
- Configure a WLAN to Use WPA2 PSK
Student Reviews & Testimonials
Real feedback from certified professionals and corporate teams
Frequently Asked Questions
What is Implementing and Administering Cisco Solutions (CCNA) v2.2?
It is Cisco training that develops foundational networking skills covering IPv4/IPv6 networks, Cisco devices, security, automation, programmability and network operations.
What certification exam does this course prepare learners for?
The course prepares learners for the 200-301 CCNA certification examination.
What is the duration of the course?
The course duration is 40 hours, delivered over 5 days.
What training formats are available?
The course is available through live online and classroom training. Optiv Solutions can also discuss flexible or customized delivery options based on the learner or organization's requirements.
What are the prerequisites for this course?
Recommended knowledge includes understanding the OSI model and network fundamentals, familiarity with binary and hexadecimal numbering, ability to use a CLI for device configuration, and fundamental knowledge of IPv4 and IPv6 addressing and subnetting.
What topics are covered in the CCNA v2.2 course?
Topics include networking functions, Cisco IOS Software, IPv4 addressing and subnets, routing and switching, VLANs and trunks, OSPF, network security, AI and ML in network operations, WAN technologies and wireless fundamentals.
What is the 200-301 exam format?
The course page lists the exam format as multiple choice, labs and case studies. The exam duration is 120 minutes.